37
English
User Controls
Options |
Lamp Settings
STD Lamp Hours
Display the projection time of using STD mode.
BRIGHT Lamp Hours
Display the projection time of using BRIGHT mode.
Lamp Reminder
Choose this function to show or to hide the warning message
when the changing lamp message is displayed. The message will
appear 30 hours before suggested replacement of lamp.
Brightness Mode
STD: Choose “STD” to dim the projector lamp which will lower
power consumption and extend the lamp life by up to 130%.
BRIGHT: Choose “BRIGHT” to increase the brightness.
Lamp Reset
Reset the lamp life hour after replacing the lamp.
To Next Page
Loading...
