Optoma EX779 - Page 14

Delta Elec. Inc. EX779
Company Confidential Optoma__________________ Delta________________
14
2010/04/14
Important:
1. Avoid using the projector with bright fluorescent lighting turned on. Certain high-frequency
fluorescent lights can disrupt remote control operation.
2. Be sure nothing obstructs the path between the remote control and the projector. If the path
between the remote control and the projector is obstructed, you can bounce the signal off certain
reflective surfaces such as projector screens.
3. The buttons and keys on the projector have the same functions as the corresponding buttons on
the remote control. This user’s manual describes the functions based on the remote control.
I TEM L ABEL D ESCRIPTION
1.
Laser Use as on-screen pointer. DO NOT POINT IN EYES.
2.
Status LED Lights when the remote control is used
3.
Power
Turns the projector on or off
4.
Up Up key when connected through USB to a PC
5.
Left Left key when connected through USB to a PC
6.
Enter Enter key when connected through USB to a PC
7.
L Left key when connected through USB to a PC
8.
Source/Left key Detects the input device/Navigates and changes settings in the OSD.
9.
Enter Navigates and changes settings in the OSD
10.
Keystone top/bottom
Corrects image-trapezoid (wider top/bottom) effect
11.
DVI-D/YPbPr/1 Changes the signal device to COMPONENT VIDEO.
12.
HDMI/4 Changes the signal device to HDMI
13.
S-VIDEO/7 Input source select S-Video
14.
MENU/2 Opens the OSD
15.
IR transmitter Transmits signals to projector