Remote Control
Using the Remote Control
Infrared transmitter Sends signals to the projector.
LED LED Indicator.
Power
Refer to the “Power On/Off the
Projector” section on pages 15-16.
Exit Press “Exit” to close the OSD menu.
Zoom in Zoom in the projector display.
Reset
Return the adjustments and settings to
the factory default values. (except for
lamp counter)
Zoom out Zoom out the projector display.
Enter Conrm your item selection.
Source
Press “Source” to select an input
signal.
Auto
Automatically synchronizes the
projector to the input source.
Four Directional
Select Keys
Use to select items or make
adjustments to your selection.
Keystone +/-
Adjust image distortion caused by tilting
the projector.
Volume +/-
Adjust to increase / decrease the
volume.
Aspect ratio
Use this function to choose your de-
sired aspect ratio.
Menu
Press “Menu” to launch the on-screen
display (OSD) menu. To exit OSD,
press “Menu” again.
To Next Page
Loading...
Need help?
General
