Optoma ProScene EH515T - Screen

25
English
User Controls
Screen
Aspect Ratio
Auto: Keep the image with original width-height ratio and maxi-

mize the image to t native horizontal or vertical pixels.
4:3: The image will be scaled to t the screen and displayed

using a 4:3 ratio.
16:9: The image will be scaled to t the width of the screen and

the height adjusted to display the image using a 16:9 ratio.
16:10: The image will be scaled to t the width of the screen

and the height adjusted to display the image using a 16:10 ratio.
(only for SSI 1080p).
UWHD: The image will be scaled to t the width of the screen

and the height adjusted to display the image using a 16:6 ratio
(only for Ultrawide).
Phase
Synchronize the signal timing of the display with the graphic card.
If the image appears to be unstable or ickers, use this function to
correct it.
Clock
Adjust to achieve an optimal image when there is a vertical icker
in the image.
H. Position
Press the ◄ button to move the image left.

Press the ► button to move the image right.

“H. Position” and
“V. Position” rang-
es will depend on
input source.