Optoma S321 - Page 29

English
29
USING THE PROJECTOR
Main
Menu
Sub Menu Sub Menu 2 Sub Menu 3 Sub Menu 4 Values
Setup
Options
High Altitude
Off [Default]
On
Display Mode
Lock
Off [Default]
On
Keypad Lock
Off [Default]
On
Information Hide
Off [Default]
On
Logo
Default [Default]
Neutral
User
Background
Color
None [Default]
Blue
Red
Green
Background
Color
Grey
Logo
Reset
Reset OSD
Cancel [Default]
Yes
Reset to Default
Cancel [Default]
Yes
Information
Regulatory
Serial Number
Current Input
Source
Resolution 00x00
Refresh Rate 0.00Hz
Projector ID 00~99
Display Mode
Power
mode(standby)
Brightness
Mode
Filter Hours
Lamp Hours
Bright mode 0H
Eco mode 0H
Dynamic mode 0H
Eco+ mode 0H
Total hours
FW Version
System
MCU
Note:
If the Signal setting is set to Automatic, the Phase, frequency items are grayed out. If the “Signal” 
setting is set to a specic input source, the phase, frequency items will appear for user to manually
tune and saved in settings.