Optoma S321 - Page 32

English
32
USING THE PROJECTOR
Color Settings
Congure the color settings.
BrillianColor 
TM
: This adjustable item utilizes a new color-processing algorithm and enhancements to
enable higher brightness while providing true, more vibrant colors in picture.
Color Temperature (data-mode only)  : Select a color temperature from Warm, Medium, or Cool.
Color Temperature  : Select a color temperature from D50, D65, D75, D83, D93, and Native.
Color Matching  : Select the following options:
Color: Adjust the red (R), green (G), black (B), cyan (C), yellow (Y), magenta (M), and white (W) ±
level of the image.
Saturation: Adjust a video image from black and white to fully saturated color. ±
Hue: Adjust the color balance of red and green. ±
Gain: Adjust the image brightness. ±
Reset: Return the factory default settings for color matching. ±
Exit: Exit the “Color Matching” menu. ±
RGB Gain/Bias:  This settings allows to congure the brightness (gain) and contrast (bias) of an
image.
Reset: Return the factory default settings for RGB gain/bias. ±
Exit: Exit the “RGB Gain/Bias” menu. ±
Color Space (non-HDMI input only)  : Select an appropriate color matrix type from the following:
AUTO, RGB, or YUV.
Color Space (HDMI input only)  : select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), and YUV.
RGB Channel:  Select from normal, red, green, or blue channels.
White Level:  Allow user to adjust White Level when inputting Video signals.
Black Level:  Allow user to adjust Black Level when inputting Video signals.
Saturation:  Adjust a video image from black and white to fully saturated color.
Hue:  Adjust the color balance of red and green.
IRE:  Allow user to adjust IRE value when inputting Video signals.
IRE is only available with NTSC video format.Note:
Exit  : Exit the “Color Settings” menu.
Signal
Adjust the signal options.
Automatic  : Congure automatically the signal (the frequency and phase items are grayed out). If
automatic is disabled, the frequency and phase items will appear for tuning and saving the settings.
Frequency  : Change the display data frequency to match the frequency of your computer’s graphic
card. Use this function only if the image appears to icker vertically.
Phase  : Synchronize the signal timing of the display with the graphic card. If the image appears to be
unstable or ickers, use this function to correct it.
H. Position  : Adjust the horizontal positioning of the image.
V. Position  : Adjust the vertical positioning of the image.
Exit  : Exit the “Signal” menu.