English
55
MAINTENANCE
Installing and cleaning the dust lter
Installing the dust lter
Note: Dust lters are only required/supplied in the selected regions with excessive dust.
Cleaning the dust lter
We recommend you to clean the dust lter every three months. Clean it more often if the projector is used in a
dusty environment.
Lamp replacing
Procedure:
1. Switch off the power to the projector by pressing the " " button on the remote control or the projector
keypad.
2. Disconnect the power cord.
3. Remove the dust lter carefully. 1
4. Clean or replace the dust lter. 2
5. To install the dust lter, reverse the previous steps.
1
2
To Next Page
Loading...
