Optris
Connect Report software
The software is included in the MSPlus and
MSPro package. For the basic model MS an
upgrade kit is available.
Minimum system requirements
Windows XP
USB interface
Hard disc with at least 30 MByte free space
At least 128 MByte RAM
CD-ROM drive
M
AIN FUNCTIONS OF THE SOFTWARE
Setup of unit parameters
Display and record of temperature trends
Easy creating of image based temperature
reports
Download of logger data
I
NSTALLATION
If the auto run option on your computer is
activated the installation wizard will start
automatically. Otherwise please start setup.exe
on the CD-ROM. Follow the instructions of the
wizard until the installation is finished.
C
ONNECTION TO THE PC
Please connect the unit via the special USB
adapter cable. The installation of the driver
software from the CD-ROM will start
automatically.
NOTE: The driver installation process will start
two times (USB adapter and COM port).
S
TARTING THE SOFTWARE
After you have started the software and
connected the unit the successful
communication will be shown in the status line
(below the time axis).
If you cannot establish a communication in spite
of correct connection between unit and
computer please choose the correct COM port
under [Menu: Setup\ Interface].
optris MS – DE2011-04-A
32
To Next Page
Loading...
