Need help?Do you have a question about the optris CompactPlus Connect and is the answer not in the manual?
General| Accuracy | ±1% or ±1°C |
|---|---|
| Response Time | 150 ms |
| Temperature Range | -20°C to 900°C |
| Spectral Range | 8 µm to 14 µm |
| Emissivity Adjustment | 0.100 to 1.100 |
| Interface | USB |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Relative Humidity | 10% to 95%, non-condensing |
| Power Supply | USB |
| Display | no display |
Overview of key functionalities including data analysis, process control, and parameterization.
Details on product warranty, limitations of liability, and software copyright.
Step-by-step guide for downloading and installing the CompactPlus Connect software.
Connecting the sensor to PC, managing communication interfaces like RS485/RS422.
Setting language, software options like Auto Start, and display preferences.
Customizing diagram properties and screen views, including digital display arrangements.
Understanding and viewing process temperature and other signals as digital displays.
Creating and customizing external signal displays with various design options.
Starting, pausing, stopping measurements, scaling axes, and saving data.
Setting measurement parameters and opening saved files.
Overview of CTratio setup, including Signal Processing, Ratio Modes, and Emissivity.
Detailed configuration for Standard and Smart Ratio modes, including Teach-in.
Configuring post-processing, failsafe, output channels, and I/O pins.
Configuring visual alarms, assigning limits, and selecting temperature units.
Configuring RS485/Optical settings and performing device calibration (Manual, 1/2-Point).
Setting Emissivity, Transmission, and compensating for ambient temperature.
Configuring averaging modes, hold functions, failsafe, and digital outputs.
Setting up relay interfaces and programming I/O pins for various functions.
Configuring visual alarms, assigning limits, and selecting temperature units.
Configuring USB/RS485 communication and performing calibration (Manual, 1/2-Point).
Overview of CSvision setup, including Signal Processing, Ratio Modes, and Emissivity.
Configuring Standard and Smart Ratio modes, and post-processing functions.
Configuring output channels and failsafe operation for CSvision sensors.
Programming the single I/O pin for CSvision as input or output.
Configuring visual alarms and selecting temperature units for CSvision.
Configuring interface parameters and performing field calibration (Manual, 1/2-Point).
Adjusting video camera settings, brightness, zoom, and setting up automatic snapshots.
Saving, loading, and resetting sensor configurations using the Setup menu.
Utilizing Smart Averaging to improve signal smoothing and handle fast temperature peaks.
Using the Binary Chat program for communication checks and additional features.
Accessing File and Measurement menu options for saving, opening, and controlling operations.
Managing devices, scanning, setting up, and configuring diagram displays.
Controlling UI elements, view options, and software preferences.
Accessing help resources and context-sensitive menu options for settings and views.
To Next Page
