optris CompactPlus Connect User Manual

-74 CT -
3.4. Display
In this tab you can make settings for the display and the backlight (= visual alarms). Furthermore, the
temperature unit can be selected here.
3.4.1. Visual Alarms
Independent of the selected signal for the analog output, a signal from the following list can be selected under
General/ Main display Source, which is shown in the digital display of the electronics:
TProc
Process temperature
TInt
Temperature of detector
TBox
General internal temperature inside the housing
For the visual alarm areas up to eight alarm limits can be assigned to a signal. The selected signal can be
selected under Source independent of the value shown in the display and independent of the analog output.

optris CompactPlus Connect Specifications

General

Brand	optris
Model	CompactPlus Connect
Category	Thermometer
Language	English