Need help?Do you have a question about the optris CT and is the answer not in the manual?
General| Brand | optris |
|---|---|
| Model | CT |
| Category | Thermometer |
| Language | English |
Introduction to the optris CT infrared thermometer, its construction, and sensitive optical system.
Details the warranty period, terms, conditions, and included components of the product.
Provides instructions for lens cleaning and general maintenance of the infrared thermometer.
Details various models of the optris CT series, their specifications, and typical applications.
Outlines the default configuration settings for output, emissivity, averaging, and alarm limits.
Lists general physical and environmental specifications including dimensions, weight, and ratings.
Details electrical parameters, output signals, digital interfaces, and relay output options.
Specifies measurement performance characteristics for the LT series models.
Specifies measurement performance for CTfast and CThot models.
Details the measurement specifications for the 1M, 2M, 3M, and 4M series models.
Provides measurement performance data for the G5 and P7 series models.
Explains optical charts and the concept of spot size for measuring distance.
Details optional CF lenses and protective windows for sensing heads.
Describes various accessories for mounting the infrared thermometer head.
Explains the use and types of air purge collars for lens cleaning.
Introduces additional accessories like right angle mirror and laser sighting tool.
Details pipe adapters and sighting tubes for use with the CT sensor.
Describes adapters for mounting electronic box on DIN rail and tilt assemblies.
Explains the IR App Connector for smartphone and tablet connectivity.
Details terminal assignments for LT, G5, P3, P7 model electronic boxes.
Details terminal assignments for 1M, 2M, and 3M model electronic boxes.
Details terminal assignments for the 4M model electronic box.
Specifies the required power supply voltage, current, and ripple characteristics.
Provides step-by-step instructions for assembling cables into the gland.
Explains ground connection setup for different model series.
Describes how to exchange the sensing head and enter its calibration code.
Provides information on shortening the sensing head cable and its impact.
Details the two analog output channels and their configurations.
Lists available digital interface options like USB, RS232, etc.
Details the optional relay output board and its capabilities.
Explains the functionality and programming of the three functional inputs.
Details the configurable I/O pin functions for the CT 4M model.
Explains the alarm features, including hysterese, and output channel use for alarms.
Details the open collector output (AL2) functionality and wiring.
Explains how to set up the sensor using programming keys and adjust parameters.
Lists and explains the various error messages that can be displayed by the sensor.
Details the IRmobile app for monitoring and analyzing temperature measurements.
Guides users through the installation process for CompactConnect/CompactPlus Connect software.
Specifies serial interface settings, protocols, and ASCII protocol switching.
Explains how parameter settings are saved and managed in the sensor.
Defines emissivity and explains its significance in infrared temperature measurement.
Outlines practical methods for determining the emissivity of an object.
Discusses factors that influence the characteristic emissivity of materials.
Provides a table of typical emissivity values for various metals.
Provides a table of typical emissivity values for various non-metals.
To Next Page
