optris CT - Communication Settings and Protocols

Software CompactConnect/ CompactPlus Connect 89-
8.2 Communication Settings
8.2.1 Serial Interface
Baudrate:
9,6...115,2 kBaud (adjustable on the unit or via software)
CT 4M: 115,2 or 921,6 kBaud (adjustable on the unit or via software)
Data bits:
8
Parity:
none
Stop bits:
1
Flow controll:
off
8.2.2 Protocol
All sensors of the CT series are using a binary protocol. Alternatively, they can be switched to an ASCII
protocol (only LT versions). To get a fast communication the protocol has no additional overhead with CR,
LR or ACK bytes.
w ww . . co m
information@itm.com1.800.561.8187