optris CT - Alarm Features and Configuration

-70 -
5.6 Alarms
The CT has the following Alarm features:
5.6.1 Output channel 1 and 2 [channel 2 on LT/ G5/ P3/ P7 only]
To activate the according output channel has to be switched into digital mode. For this purpose the software
CompactConnect/ CompactPlus Connect is required.
On the CT model 4M both outputs are freely selectable. Analog mA/mV, Alarm mA/mV and TCK
are available.
All alarms (alarm 1, alarm 2, output channel 1 and 2 if
used as alarm output) have a fixed hysterese of 2 K
(CThot: 1 K).
w ww . . co m
information@itm.com1.800.561.8187