-8 -
1 General Information
1.1 Description
Thank you for choosing the optris® CT infrared thermometer.
The sensors of the optris CT series are noncontact infrared temperature sensors.
They calculate the surface temperature based on the emitted infrared energy of objects [►9 Basics of
Infrared Thermometry]. The sensor housing of the CT head is made of stainless steel (IP65/ NEMA-4
rating) – the sensor electronics is placed in a separate box made of die casting zinc.
The CT sensing head is a sensitive optical system. Please use only the thread for mechanical
installation.
• Avoid abrupt changes of the ambient temperature.
• Avoid mechanical violence on the head – this may destroy the system (expiry of warranty).
• If you have any problems or questions, please contact our service department.
Read the manual carefully before the initial start-up. The producer reserves the right to change
the herein described specifications in case of technical advance of the product.
► All accessories can be ordered according to the referred part numbers in brackets [ ].
w ww . . co m
information@itm.com1.800.561.8187
To Next Page
Loading...
Need help?
General
