While the standard mode requires a
constant emissivity ratio/slope, the
Smart Ratio measurement allows a
data set of different slopes to be
recorded and applied for temperature
calculation. This is required, for
example, if the degree of contamination
of the protective window changes
during the process and the ratio
temperature is no longer correct. This
cannot be described with a constant
slope.
A requirement for the measurement is that the object temperature must be known.
Note: Before the first use a data record must be recorded
In the Teach-in function, the data records are recorded.
The Smart Ratio mode can be activated or deactivated with the On/Off buttons.
To Next Page
Loading...
Need help?
General
