If the sensor is connected to your computer and you start the software,
the process temperature T
Proc
will be shown as digital display.
You can add additional displays [Menu: Diagram\ Settings]. Dependent
on the sensor type the available signals may vary.
T
Proc
includes the current post processing functions (average, peak hold,
etc.).
The once selected displays will also appear after a restart of the
software. The size can be changed if you put the cursor on the line
beneath the display and pull it down. The buttons of the tool bar will also
be moved (depending on the display size).
The colors of the different displays are equal to the colors selected under
[Menu: Diagram\ Settings] for the corresponding temperature graphs.
►Basic Settings
To Next Page
Loading...
Need help?
General
