optris P20 Series User Manual

________________________________
29
Optris Connect Report software
MAIN FUNCTIONS OF THE SOFTWARE
 Setup of unit parameters
 Display and record of temperature trends
 Easy creating of image based temperature
reports
 Download of logger data
INSTALLATION
If the auto run option on your computer is
activated the installation wizard will start
automatically. Otherwise please start setup.exe
on the CD-ROM. Follow the instructions of the
wizard until the installation is finished.
CONNECTION TO THE PC
Please connect the unit via the special USB
adapter cable. The installation of the driver
software from the CD-ROM will start
automatically.
NOTE: The driver installation process will start
two times (USB adapter and COM port).
STARTING THE SOFTWARE
After you have started the software and
connected the unit the successful
communication will be shown in the status line
(below the time axis).
If you cannot establish a communication in spite
of correct connection between unit and
computer please choose the correct COM port
under [Menu: Setup\Interface].
Minimum system requirements
 Windows XP
 USB interface
 Hard disc with at least 30 MByte free space
 At least 128 MByte RAM
 CD-ROM drive
All manuals and user guides at all-guides.com
all-guides.com

optris P20 Series Specifications

General

Brand	optris
Model	P20 Series
Category	Thermometer
Language	English