optris PI - Page 19

optris PI – E2010-03-A
17
IR-Live picture from the camera
Temperature profile: Shows the temperatures along max. 2 lines, which can have any size and
position inside the picture.
Reference bar: Shows the scaling of the palette
Temperature of measure area:
Shows the temperature according to the selected measurement function
(example in the picture: average temperature in the measure points area. This value is shown also inside the IR
picture (right top corner)
Control displays
Enables displaying of all temperature values in the defined measure areas, Cool Spots, Hot Spots,
temperature at cursor, internal temperature and chip temperature
Alarm displays
Diagram of defined temperature scale showing low alarm value (blue arrow) and high alarm value (red arrow)
The color changes to red (when temperature above the high alarm value) and to blue (when temperature below
the low alarm value)
Histogram: Shows the statistic distribution of single temperature values.
Automatic/ Manual scaling of displayed temperature range
</> : Min, Max 1σ : 1 Sigma 3σ : 3 Sigma
Icon enabling switching between palette colors
Icon for quick access to Image Substraction function
1
2
3
4
5
6
7
8
9
10