optris PI - Configuration: Device (PIF)

optris PI – E2010-03-A
45
Configuration: Device (PIF)
The PI is equipped with a process interface, which can be programmed via the software as Input [PIF in] (to
control the camera) or as Output [PIF out] (to control the process).
Process interface (PIF in): Programming of the PIF as input (0-10 V) to control the emissivity setting,
ambient temperature value, reference temperature value or flag remotely.
Moreover recording and snapshots can be triggered using this input.
Process interface (PIF out): Programming of the PIF output (0-10 V) in order to supply measured values
(temperature of main area, internal camera temperature, flag state and alarm
statuses).