Oracle Database B10772-01 - SQLNET.CRYPTO_CHECKSUM_CLIENT Parameter Attributes; SQLNET.CRYPTO_CHECKSUM_SERVER Parameter Attributes; SQLNET.ENCRYPTION_CLIENT Parameter Attributes

Data Encryption and Integrity Parameters
Data Encryption and Integrity Parameters A-5
on the value set for SQLNET.ENCRYPTION_SERVER at the other end of the
connection.
SQLNET.CRYPTO_CHECKSUM_SERVER
This parameter specifies the desired data integrity behavior when a client or
another server acting as a client connects to this server. The behavior partially
depends on the SQLNET.CRYPTO_CHECKSUM_CLIENT setting at the other end of
the connection.
SQLNET.CRYPTO_CHECKSUM_CLIENT
This parameter specifies the desired data integrity behavior when this client or
server acting as a client connects to a server. The behavior partially depends on the
SQLNET.CRYPTO_CHECKSUM_SERVER setting at the other end of the connection.
Table A–3 SQLNET.ENCRYPTION_CLIENT Parameter Attributes
Attribute Description
Syntax SQLNET.ENCRYPTION_CLIENT = valid_value
Valid Values ACCEPTED, REJECTED, REQUESTED, REQUIRED
Default Setting ACCEPTED
Table A–4 SQLNET.CRYPTO_CHECKSUM_SERVER Parameter Attributes
Attribute Description
Syntax SQLNET.CRYPTO_CHECKSUM_SERVER = valid_value
Valid Values ACCEPTED, REJECTED, REQUESTED, REQUIRED
Default Setting ACCEPTED
Table A–5 SQLNET.CRYPTO_CHECKSUM_CLIENT Parameter Attributes
Attribute Description
Syntax SQLNET.CRYPTO_CHECKSUM_CLIENT = valid_value
Valid Values ACCEPTED, REJECTED, REQUESTED, REQUIRED
Default Setting ACCEPTED