Parameters for Clients and Servers using SSL
Authentication Parameters B-9
■ SSL_RSA_WITH_RC4_128_MD5
■ SSL_RSA_WITH_DES_CBC_SHA
■ SSL_DH_anon_WITH_3DES_EDE_CBC_SHA
■ SSL_DH_anon_WITH_RC4_128_MD5
■ SSL_DH_anon_WITH_DES_CBC_SHA
■ SSL_RSA_EXPORT_WITH_RC4_40_MD5
■ SSL_RSA_EXPORT_WITH_DES40_CBC_SHA
■ SSL_RSA_WITH_AES_128_CBC_SHA
■ SSL_RSA_WITH_AES_256_CBC_SHA
Note that the cipher suites that use Advanced Encryption Standard (AES) work
with Transport Layer Security (TLS 1.0) only.
SSL Version Parameters
This section describes the static and dynamic parameters for configuring the version
of SSL to be used.
Parameter Name
(static):
SSL_VERSION
Parameter Name
(dynamic):
SSL_VERSION
Parameter Type: string
Parameter Class: Static
Permitted Values: Any version which is valid to SSL. (0, 3.0)
Default Value: "0"
Description: To force the version of the SSL connection.
Existing/New
Parameter
New
Syntax (static): SSL_VERSION=version
Example (static): SSL_VERSION=3.0
Syntax (dynamic): SSL_VERSION=version
To Next Page
Loading...