Orange Electronic P429 - Mode 2：Tires Diagonal Exchanged

Manual for Tire Pressure Monitoring Systems, TPMS
15/22
Mode 2：Tires diagonal exchanged
Step
Operation process
Photograph
1
Rotate the tires diagonally. To prevent from incorrect
positioning, mark the tires.
2
Press both the set key and function key simultaneously for
5 seconds. The display will flash red, and a “beep” sound
will be heard. You can release the buttons, and the system
has entered into mode 1. If presses function key again,
then the system has entered into mode 2.
【Function】Key
【Set】Key
3
3-1
After entering mode 2, the display will show “2”.
3-2
Numbers show in LED lights stands for tires’ ID, photograph
○
1 and
○
3 means tires position before changing,
photograph
○
2 and
○
4 means after changing.
3-3
The operator only needs to press the set key for 3 second
and listen for the “beep”. This means the mode 2 has been
chosen and will exchange all four sensors ID positions and
will automatically return the monitoring status to normal.