16
EN
3 Attaching the suction floor nozzle with a brush (or other accessory) to
the suction tube
Attach a floor nozzle (as shown below) or other nozzles to the end of the lower
suction tube. Brush on the floor nozzle to push or push in on the surface to be
vacuumed by pressing the foot control.
Other accessories (located in the accessory compartment)
Crevice nozzle
Use the crevice nozzle to vacuum radiators, crevices, corners, wall corners
and mattress gaps.
Round brush nozzle
Use a round brush nozzle for vacuuming upholstery or carpet in confined
spaces, for vacuuming furniture dust, or a PC keyboard, etc.
Turbobrush
Use a turbo brush to remove animal hair, hair. You can use it not only at home,
but also in the car.
Parquet nozzle
You can vacuum with it wooden and floating floors, tiles, linoleum, etc.
With this vacuum cleaner
Unwinding and winding the power cord
After attaching the necessary accessories, unwind the required length of the
power cord and plug it into the mains.
To wind the cord, press the cord winding button and add additional hands to the
cord.
Warning!
The yellow mark on the power cord indicates the optimum unwinding length of the
power cord. Do not remove the power cord for your purpose.
Lose expect to damage winding mechanism.
K
To Next Page
Loading...
