21
EN
Cleaning and maintenance
• Unplug the power cord. Never wash the device under running water or
immerse it in water.
• Clean the device and accessories with a soft cloth.
Do not use solvents, thinners, alcohol, or abrasive cleaners for cleaning.
• The device must remain completely dry after cleaning.
Motor thermal fuse
The device is equipped with a thermal fuse against overloading and overheating.
This can happen if the hose, tube or nozzles are blocked. If the device turns itself
off in the middle of operation, turn it off and wait at least 45 minutes for the engine
to cool. Then remove any possible cause of blockage of the hose, tube or nozzle,
replace the bag and clean the filters.
After the engine has cooled down, switch the device on again.
If the device still does not work properly, contact the service center.
To Next Page
Loading...
