20
EN
Motor protection filter (front filter)
1 Open the front cover, remove the dirt bag.
2 Pull out the filter, clean the filter with warm water and dry it thoroughly, or
replace the filter with a new one.
3 Reinstall the cleaned / new filter, insert the dirt bag, and close the cover.
Exhaust Filter (HEPA)
1 Open the rear grill.
2 Select the filter system.
3 Remove the HEPA filter from the system, clean the filter with lukewarm water
and dry it thoroughly, or replace the filter with a new one.
4 Reinsert the cleaned / new filter and replace the grille.
Warning!
Never insert a wet filter into the vacuum cleaner as this may damage the vacuum
cleaner or cause an electric shock.
Cleaning the suction opening
If there is an object clogging the suction opening of the vacuum cleaner, proceed
as follows:
1 Pull out the hose.
2 Remove the sucked obstruction from the suction port.
3 Attach the hose.
K
K
K
To Next Page
Loading...
