Orava Volcano - Replacing the Dust Bag

18
EN
After vacuuming
1 Press the ON / OFF switch on the device to turn off the vacuum cleaner.
2 Unplug the power cord.
3 Push and hold the cord winding control (also with your foot)
and wind the power cord. Hold the cord lightly with your hand when winding
the power cord.
4 Store the vacuum cleaner and accessories in their place.
Replacing the dust bag
Full pocket indicator
The vacuum cleaner is equipped with a full bag indicator. When the bag is full
or the tube or hose is blocked, the indicator will turn red. If the suction power
decreases significantly, check that the hose is not blocked. Then check that the
bag is not full. If so, replace it. We recommend changing the bag when it is full to
2/3 of the volume.
Warning!
Disconnect the power cord from the wall socket before emptying / replacing the
bag to avoid electric shock.
Note
When vacuuming new or fine-fiber carpets, the bag may fill up faster, so check it
more often.
Never vacuum without a dirt bag inserted.
1 Squeeze the front cover release lock, open the compartment cover, and
remove the pocket holder.
K
K
K