15
EN
Assembly and operation
Before first use
Unpack the device and remove all packing material.
Vacuum cleaner assembly
Pred nasadzovaním alebo odoberaním príslušenstva odpojte sieťovú šnúru z
elektrickej siete.
1 Attaching the flexible hose to the vacuum cleaner
Insert the end of the flexible hose into the grooves of the suction opening in the
vacuum cleaner and turn it clockwise until it clicks into place.
Removing the hose
Turn the inserted end of the hose counterclockwise and pull the hose out of
the suction opening.
2 Insert the metal suction tube into the flexible hose
Place the metal suction tube (as shown below) on the other (bent) end of the
flexible hose (handle).
Suction tube length adjustment
Adjust the length of the suction tube after pressing the locking element on the
tube and pull out the extended part of the tube.
K
K
To Next Page
Loading...
