Orava Volcano - Troubleshooting

22
EN
Problem Possible cause Recommendation
The vacuum
cleaner will
not switch on
- the power cord is not
plugged in properly
and securely into the
wall outlet
- the power socket is
damaged
- plug the plug firmly into
the mains socket
- check the power socket
The suction
power is weak
- device/hose is
clogged
- the dust filter is dirty
- the filter is clogged
- remove the clogged
material
- clean the dust filter
- clean the filter
The cable will
not be reeled
the cable could jam
during the winding
when wiring the cable,
hold the cable slightly
tightened
Power control
does not work
the device is broken ensure equipment repair
(service)
Troubleshooting