7. Calories：
7.1 Calories convert by each stroke/row. Range is 0~999
(Calories/Hour = Kcal/ht = (Watts)*4*0.8604+300)
7.2 Calories mode counts backward. Setting range is 10cal〜999cal.
8. Watts
8.1 Watts convert by each stroke/row. (Watts=2.80 / (sec/meter)^3)
8.2 If watts over 999, display shows 999.
9. Paddle width
9.1 Display range: 0~99M
9.2 Display current distance of each stroke/row.
9.3 Distance of each stroke/row
9.3.1 1 Metric Units: Each stroke/row = 2.094*paddle wave/100 (Meter)
9.3.2 Imperial Units: Each stroke/row = (2.094*paddle wave/100) /0.3048 (Feet)
9.3.3 1 Feet = 0.3048 Meter
10. Low battery reminder
10.1 The low battery symbol appears only when the battery is low.
10.2 No back light when in low battery.
11. Buzzer
11.1 The “beep” sound appears when any effective button has pushed.
11.2 If function is ineffective, no sound.
PROGRAM DESCRIPTIONS
This console monitor contains the following programs: (1) Normal, (2) Distance, (3) Time, (4)
Calories, (5) Game, (6) 20/10 Interval, (7) 10/20 Interval, and (8) 10/10 User Setting Interval.
In power OFF state, press any button to power up the meter, into LCD full display, and “beep”
sound for 2 seconds enter IDLE MODE. User will enter Normal Program directly when the speed
sensor receives signal.
Push “Select” to change workout program according to the following sequence: Normal Æ
Distance Æ Time Æ Calories Æ Game Æ 20/10 Interval Æ 10/20Interval Æ 10/10 User Setting
Interval
1. Normal Program
1.1 Users take first stroke/row and the workout starts.
1.2 Beginning state: Static wave (waiting for first stroke/row).
To Next Page
Loading...
Need help?
General
