ASSEMBLY INSTRUCTIONS
STEP 1
Attach FRONT SUPOORT LEG A(7) and FRONT SUPPORT LEG B(8) to FRONT
STABILIZER(4) using: M6X16mm SOCKET HEAD CAP SCREW(81) and M6 FLAT
WASHER(76).
NOTE: Do not fully tighten bolts until instructed.
STEP 2
Attach FRONT SUPPORT LEG A(7) and FRONT SUPPORT LEG B(8) to MAIN FRAME(1)
using: M6X16mm SOCKET HEAD CAP SCREW(81) and M6 FLAT WASHER(76).
NOTE: Complete this step before taking the item out from its packing material styrofoam A and B.
To Next Page
Loading...
