--11--
3. Inspection before operation
To ensure safe operation always do the inspection according to "7.3 periodic inspection table" and
perform any necessary maintenance. Ask retailer for any questions.
・ Always stop the engine and remove the ignition key before inspection, adjustment, and
maintenance.
・ Please check the position of levers, and the work area around you when you do the moving test
with engine on.
・ Please carefully read the warning labels on this machine.
Follow all instructions to avoid injury.
Check list before operate
（Excerpt from inspection table）
Oil quantity, cleanliness.
Air filter damage, loosening, cleanliness
Engine base cracking or deformity, loosening
of nuts and bolts
4.Muffler and surrounding
Accumulation of debris around the muffler
Fuel leak, aging, deformity, clog, cleanliness
Loose or Missing Bolts & Nuts
Deformation, wear & tear, interference
Smoothness, no sticking
Remove debris, ice, snow
Oil quantity, cleanliness, oil leakage
To Next Page
Loading...
Need help?
General