--34--
7. Inspection table
7.1 Periodic inspection table
★Neglecting inspection and maintenance can cause accidents and damage. Perform inspection
referring to [Periodic voluntary inspection table] to ensure the machine is kept functioning correctly.
Perform annual inspection once a year and monthly inspection once a month, and starting checks
every time you use the machine.
D: Daily M: Monthly Y: Yearly
Service
&
parking
Brakes
(when
equipped)
Brake rod, springs, joint
No damage, deform, loosening
Condition at startup,
abnormal noise.
Machine starts up easily.
Power and acceleration state
Power increases gradually and
smoothly.
State of exhaust and gas
leakage
Exhaust color, smell, and sound are
normal.
Air filter damage, loosening,
cleanliness
No damage, loosening, or noticeably
dirty.
Loosening of the attachment
of cylinder head and
manifolds
Gas leak, cracking, noticeable
corrosion.(Tightened to the correct
torque, not loose)
Clearance looks straight.
Compressive pressure looks straight.
Engine base cracking or
deformity, loosening of nuts
and bolts
The engine base is not cracked or
deformed and the nuts and bolts are
secure.
Oil quantity is suitable, not dirty or
mixed with any water or metals.
Oil seal and gasket are not leaking
oil.
Not dirty, deformed, or clogged.
There is fuel in the engine and it is of
good quality.
Loosening damage to
electrical wires connections
Harness connections are suitable,
not loose or damaged.
Dirtying of air filter element
Air filter element is not dirty.
Element is not torn or worn out.
Weeds etc clogged in the
recoil cover
Recoil cover is not clogged with
weeds.
Accumulation of weeds in
the muffler
There is no accumulation of weeds
around the muffler.
If the battery has enough voltage to
operate the machine.