--12--
3.1 Inspection of engine oil level
・ To check the oil level, place the machine on a flat surface.Unscrew
the dipstick and inspect, using oil gauge. Check oil level by
inserting and removing the dipstick without screwing it into the filler
hole. If the oil level is low, add oil to the upper level
・ To avoid injury, make sure the engine has cooled down before checking oil.
・ This machine is shipped WITHOUT engine oil. Fill with engine oil to the correct level before
starting the engine, even if there are traces of residual oil in the engine from factory testing.
・ Please always use the proper quality oil, see below. The proper oil for the outside temperature will
ensure the best performance.
・ After refilling the oil, make sure to tighten the dipstick to prevent leaking.
・ Make sure there’s enough oil quality when you use it on slopes.
Recommend type of oil
To Next Page
Loading...
Need help?
General