Name: OREC SNOW RHINO
Brand: OREC
Rating: 4 (1 reviews)

To Next Page

To Previous Page

--17--

4.2.2 Turning

・ When tilting the control lever R to forward,

the right track spins and turns the machine to

the left.

・ When tilting the control lever L to forward, the

left track spins and turns the machine to the

right.

・ The machine moves at the highest speed when you tilt the control lever all the way. Do not turn

while operating at high speed to prevent fall out or injury. Always use a safe speed when turning.

4.2.3 Park

・ Move both control levers to neutral position, then move the

main clutch lever to [PARK] position.

・ Move the throttle lever to low then turn the ignition key to

[OFF] position.

・ Park the machine on a flat surface in a wide open space

・ When leaving the machine unattended, ALWAYS turn off the engine and remove the ignition key.

WARNING

Main Clutch Lever

CAUTION

Questions and Answers:

Need help?

Do you have a question about the OREC SNOW RHINO and is the answer not in the manual?

OREC SNOW RHINO Specifications

General