Oreck ProShield - Page 16

13
Problem Check Solution
Odor Absorber
light on unit has
turned red.
Odor Absorber • Replace odor absorber if desired.
• If odor absorber is not replaced, remove
old odor absorber to turn off Check Odor
Absorber light.
Does not
remove odor.
Odor Absorber • Vacuum odor absorber with a soft brush
attachment if dirty. Do not use any liquids
to clean the Odor Absorber.
• Replace odor absorber if desired.
Unit still does
not operate
properly.
Check all the
above points.
Contact Oreck for service.