8
GB
[MEMORY]. Press [MEMORY] again to alternate between the
maximum, minimum and current readings. The respective MAX or
MIN indicator will be displayed.
To clear the memory, press [MEMORY] and hold for three seconds.
The maximum and minimum recorded readings will be erased. If
you press [MEMORY] after the memory has been erased, the
maximum and minimum readings will have the same values as the
current ones.
TEMPERATURE & HUMIDITY TREND
The temperature and humidity trend indicator shows the trend of
temperatures and humidities collected at that particular sensor in
the past. Three trends: rising, steady, and falling will be shown.
ATMOSPHERIC PRESSURE
The atmospheric pressure indicator in the weather forecast window,
uses arrows to indicate if the atmospheric pressure has increased,
remained stable, or decreased.
WEATHER FORECAST
The unit is capable of detecting atmospheric pressure changes.
Based on collected data, it can predict the weather for the forthcoming
12 to 24 hours. The effective range covers an area of 18 to 30miles
(30 to 50 km).
NOTE:
1. The accuracy of a general pressure-based weather forecast is
about 70% to 75%.
2. The weather forecasts from this unit are predictions that cover the next
12 to 24 hours. It may not necessarily reflect the current situation.
3. The “Sunny” icon, as applies to night time, implies clear weather.
Rising
Arrow indicator
Temperature
Trend
Steady Falling
Rising
Arrow indicator
Humidity Trend
Steady Falling
Rising
Arrow indicator
Pressure Trend
Steady Falling
Forecast Sunny
Partly Cloudy
Cloudy Snowy
Indicator
displays on
the unit
Raining
To Next Page
Loading...
