To Next PageTo Next PageHow to fix clock issues on Oregon Scientific Modena FSW-301 Weather Station?
To resolve clock issues with your Oregon Scientific Weather Station: 1. Ensure batteries are correctly installed and have sufficient power. 2. Press the RESET button. 3. Manually activate auto-synchronization.
What to do if the remote unit isn't working on my Oregon Scientific Weather Station?
If you are experiencing issues with the remote unit of your Oregon Scientific Weather Station, a simple solution is to check the batteries. Ensure they are properly installed and have sufficient charge.
How to correct the baro reading on Oregon Scientific Modena FSW-301?
To correct the barometric reading on your Oregon Scientific Weather Station, set the altitude and unit settings as described in section 15 of the manual.
How to fix calendar issues on Oregon Scientific Modena FSW-301?
To fix calendar issues on your Oregon Scientific Weather Station, change the language setting. Refer to section 11 of the manual for instructions.
General| Brand | Oregon Scientific |
|---|---|
| Model | Modena FSW-301 |
| Category | Weather Station |
| Type | Wireless |
| Temperature Measurement | Yes |
| Humidity Measurement | Yes |
| Indoor Temperature | Yes |
| Outdoor Temperature | Yes |
| Weather Forecast | Yes |
| Radio controlled clock | Yes |
| Display Type | LCD |
| Power Source | Battery |
| Temperature Range (Indoor) | 0°C to 50°C |
| Temperature Range (Outdoor) | -20°C to 60°C |
| Humidity Range | 25% to 95% |
| Transmission Range | 30 meters |
Diagram illustrating the top view of the main unit with labeled controls.
Instructions for replacing batteries in main and remote units, including polarity and reset.
Procedure for entering setting mode and changing values using UP/DOWN buttons.
Instructions for mounting the remote unit and optimal placement for reception.
Instructions to set the radio signal format (EU/UK) and reset the unit for synchronization.
Instructions to disable or enable automatic radio-controlled clock synchronization.
Guide to setting the alarm time, type (Beep/Ferrari), and confirmation.
Instructions for temporarily disabling the alarm (snooze) or turning it off/on for the next day.
How to set barometer units (mb/hPa, inHg) and altitude for accurate measurements.
