Oregon Scientific OUTBREAKER RA201 - How to Set the Resolution of Altitude; How to Set the Altitude Alarm

12
GB
Refer to Fig 4a to set the altitude.
Notes:
a) The correct local altitude could be found from a topographical
map.
b) Setting the altitude affects the sea level pressure displayed.
c) The altitude can be calibrated by setting the sea level pressure.
For details please refer to section HOW TO SET THE SEA
LEVEL PRESSURE.
HOW TO SET THE RESOLUTION OF
ALTITUDE
Resolution of altitude can be set in the sequence of setting the altitude.
Either 1m (3ft) or 3m (10ft) can be selected for the resolution. The
altitude will be updated according to the resolution selected.
1. Press and hold SET for two seconds in altitude-clock display to
enter the altitude setting mode.
2. Press SET to toggle to the resolution of altitude setting mode.
3. Press +/- to select the desired resolution (1m/3m or 3ft/10ft)
4. Press SET to confirm the setting and quit the setting mode.
Refer to Fig 4b to set the resolution of altitude.
Note:
• Press and hold +/- function is not available for select the resolution
of altitude.
HOW TO SET THE ALTITUDE ALARM
RA201 is equipped with an altitude alarm. Either ascending or
descending altitude alarm could be selected. the ascending altitude
alarm will be turned on whenever the set altitude is reached during
ascending from an ascending path. The descending alarm will be
turned on whenever the set altitude is reached during descending
from a descending path.
1. Press and hold SET for two seconds in altitude-altitude alarm
display to enter the altitude alarm setting mode.
2. Press +/- to select either ascending or descending altitude alarm.
Set altitude
Set resolution
SET
SET
Fig.4a
Fig.4b
SET
+ / -
+-