Oregon Scientific OUTBREAKER RA201 - Sea Level Pressure Display

14
GB
Refer to Fig 4d to set the weather forecast icon.
Notes:
a) Since the weather forecast can be affected by oceanic or
continental weather phenomena, the forecast could be less
accurate. The manufacturer is not responsible for any
inconveniences caused by faulty weather forecast.
b) The weather forecast is meant for the next 12 to 24 hours. It may
not necessarily reflect the current situation.
SEA LEVEL PRESSURE DISPLAY
In the sea level pressure display there are two functions that can be
called out from the RA201: sea level pressure history memory and
bar graph of the history.
1. Press FUNC in altitude-sea level pressure display.
2. Press +/- to select the sea level pressure history memory to display.
3. Press FUNC to toggle to the sea level bar graph to display.
4. Press FUNC to go back to the altitude-sea level pressure display.
Refer to Fig 4e to call out the sea level history and bar graph
functions.
Notes:
a) The history recalled can be selected from –1 hour to –24 hour.
b) If left idle for 30 seconds in these functions, the watch will resume
back to the altitude-sea level pressure display.
c) After changing the battery “--” will be shown as no data kept in
the sea level pressure history memory and bar graph will be clear
(see diagram below). The history and the bar graph will be updated
hourly after one hour.
Sea level pressure history
Sea level pressure bar graph
Set sea level pressure
FUNC
FUNC
FUNC
SET
Fig.4f
Fig.4e
SET
+-
Set weather forecast icon
SET
SET
Fig.4d
+-