Oregon Scientific OUTBREAKER RA201 - Section 2: Calendar Clock Mode

8
GB
SECTION 2 CALENDAR CLOCK
MODE, ZONE TIME AND UNIT OF
MEASUREMENT
INFORMATION SHOWN IN CALENDAR
CLOCK MODE
Six information can be shown in calendar clock: date, seconds, zone
time, daily alarm, chronometer and temperature. Press SELECT to
access the information one by one. Refer to Fig 2 to toggle between
the information in calendar clock mode.
HOW TO SET THE CALENDAR CLOCK
1. Press and hold SET for two seconds in either clock-date or
clock-second display to enter the calendar clock setting
mode.
2. Press SET to toggle the field in the calendar clock setting mode.
The order of field follows: 12/24hr format, hour, minute, year,
month, date, zone time and unit of measurement.
3. Press +/- to increase or decrease the values or change the setting.
4. Press SET to confirm the setting and toggle to next field and
then quit the setting mode.
Refer to Fig 3 to set the calendar clock.
SELECT
Date
Temperature Chronometer Alarm
Second Zone time
SELECT
SELECT SELECT
SELECT SELECT
Fig.2
Fig.3
Fig.3b
Fig.3a
12hr/24hr Set hour Set minute
Set month
Set year
Set day
SET
SET
SET
SET
SET
SETSETSET
Set zone time
Set unit
+ / -
+-+-+-
+-+-+-+-
SET