Oregon Scientific RMR329P User Manual

5
EN
4. The setting order is: time zone offset, 12/24-hr
format, hour, minute, year, day / month format,
month, day and language.
NOTE
Time zone offset sets the clock +/- 23 hours
from the received clock signal time.
NOTE
The language options are (E) English, (F) French,
(D) German, (I) Italian, and (S) Spanish.
To select display mode:
Press CLOCK to choose between clock with seconds
and clock with weekday.
ALARM
To set the alarm:
1. Press and hold ALARM for 2 seconds to enter
alarm-setting mode.
2. Press / to set hour / minute.
3. Press ALARM to confi rm
. indicates alarm is ON.
To toggle alarms ON / OFF:
1. Press
ALARM to display alarm time.
2. Press
ALARM again to turn alarm ON / OFF.
To silence the alarms
:
• Press SNOOZE to silence it for 8 minutes
OR
• Press any other key to turn the alarm off and activate
it again after 24 hours.
TEMPERATURE
To toggle temperature unit
:
Press °C / °F.
To toggle between outdoor / indoor sensor readings
:
Press TEMP. / indicates indoor and outdoor
temperature.
To
auto-scan between sensors
:
Press and hold TEMP for 2 seconds to display the
sensor’s data for 5 seconds.
To deactivate auto-scan function press TEMP.
PROJECTOR AND BACKLIGHT
To activate Projection function
:
• Slide PROJECTION switch to ON to illuminate
projection continuously.
To activate Backlight function:
• Slide LIGHT switch to ON to illuminate backlight
continuously.
OR
• Press
SNOOZE to turn on projector and backlight
for 5 seconds.
• Press repeatedly to fl ip dual line projection image
by 180 degrees.
NOTE
If projection is illuminated, do not look directly
into the projector.
RMR329P_M_EN_R1.indd 5 6/21/07 12:45:27 PM

Oregon Scientific RMR329P Specifications

General

Product color	Silver
Temperature measurement range (inside) (T-T)	-5 - 50 °C
Temperature measurement range (outside) (T-T)	-30 - 60 °C
Number of batteries (sensor)	3
Number of batteries (receiver)	2
Dimensions (WxDxH)	50.8 x 152.4 x 114.3 mm