EasyManua.ls Logo

Oregon Scientific RRM313P - Troubleshooting; Technical Specifi Cations

Oregon Scientific RRM313P
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
8
PROBLEM SYMPTOM
REMEDY
Clock time is No radio signal
Place the clo
ck far
not correctly set
reception
not correctly set
reception
not correctly set
away from PCs,
phones, and other
electronic equipment
and near a windowsill.
Wait for at least 24
hours
No alarm Alarm does not
Turn on the sett
ing
sound
Operation
Certain funct
ions
Reset the clock
not normal do not perform
Calendar Strange day
Check it is set to
your
own language
Clock Cannot change
Disable the radio
clock signal and set
manually
Clock / Calendar
Cannot auto- 1. Ad
Clock / Calendar
Cannot auto- 1. Ad
Clock / Calendar
just batteries
synchronize 2. Press
RESET
the clock
TYPE DESCRIPTION
Main Unit Dimensions
L x W x H 110 x 57 x 100 mm
(4.33 x 2.24 x 4.05 inches)
Weight (without battery) 201 g (0.44 lbs)
Main Unit RF
RF Clock Frequency
System
Synchronization Auto or disabled
FM Band Range 87.5-108.0 MHz
Main Unit Display
Clock HH:MM:SS
HH:MM: Day of week
HH:MM: Time zone hour offset
Hour Format
12hr AM / PM (MSF Format)
24hr (DCF Format)
Calendar
DD / MM or MM / DD, user
selectable. Weekday language:
E, D, F, I, S.
Alarm • 2-minute alarm
• 8-minute snooze
Power
Main Unit 2 x UM-3 / AA 1.5V batteries
or
AC / DC
TYPE DESCRIPTION
Synchronization Auto or disabled
FM Band Range 87.5-108.0 MHz
L x W x H 110 x 57 x 100 mm
(4.33 x 2.24 x 4.05 inches)
Weight (without battery) 201 g (0.44 lbs)
Clock HH:MM:SS
HH:MM: Day of week
24hr (DCF Format)
E, D, F, I, S.
Alarm 2-minute alarm
8-minute snooze
Main Unit 2 x UM-3 / AA 1.5V batteries
or
PROBLEM SYMPTOM
Clock time is No radio signal
reception
hours
No alarm Alarm does not
sound
not normal do not perform
Calendar Strange day
Clock Cannot change
clock signal and set
manually
Cannot auto- 1. Ad
synchronize 2. Press
the clock
hours
sound
Reset the clock
clock signal and set
manually
Cannot auto- 1. Ad
synchronize 2. Press
RRM313P_M_EN_op.indd 8 2006.4.6 3:19:52 PM

Related product manuals