Oregon Scientific WMR100 - UV Index; Barometer; Rainfall; Weather Alarms

11
EN
UV INDEX
The UV index levels are as follows:
UV INDEX
DANGER ICON
LEVEL
0-2 Low
3-5 Moderate
6-7 High
8-10 Very high
11 and above Extremely high
To change the high UV alarm:
1. In the UV / Barometer / Rainfall Area and UVI
reading display. Press and hold
ALARM
to enter the
high UV alarm setting.
2. Rotate the dial left or right to set the desired values.
3. Press
ALARM
to confi rm the settings.
To activ
ate / deactivate the high UV alarm:
1. In the UV / Barometer / Rainfall Area and UVI
reading display, press
ALARM
repeatedly to select
the desired alarm.
2. Press
MEMORY /
ON/OFF
to activate or
deactivate the alarm.
BAROMETER
To change the barometer alarm:
1. In the UV / Barometer / Rainfall Area and Barometer
reading display. press and hold
ALARM
to enter the
Barometer alarm setting.
2. Rotate the dial left or right to set the desired values.
3. Press
ALARM
to confi rm the settings.
To activa
te / deactivate the barometer alarm:
1. In the UV / Barometer / Rainfall Area and Barometer
reading display, press
ALARM
repeatedly to select
the desired alarm.
2. Press
MEMORY /
ON/OFF
to activate or
deactivate the alarm.
T
o set th
e altitude level compensation for the
Barometer readings:
1. In the UV / Barometer / Rainfall Area and Barometer
reading display. Press and hold
MODE
to enter the
altitude setting.
2. Rotate the dial left or right to set the desired values.
3. Press
MODE
to confi rm the setting.
RAINFALL
To view the current hour, accumulated or last 24
hours rainfall history:
In the UV / Barometer / Rainfall Area and Rainfall reading
display, press
MEMORY / ON/OFF
repeatedly to
toggle between current, past 24 hours or accumulated
rainfall. The clock line will change to display the start
time when the accumulated rainfall is displayed. The
icon
appears and the start date is showing.
To toggle between rainfall & rain rate display:
In the UV / Barometer / Rainfall Area and Rainfall reading
display, press and hold MODE.
To reset the accumulated rainfall and timestamp:
In the UV / Barometer / Rainfall Area and Rainfall reading
display. Press and hold MEMORY / ON/OFF to
reset
the accumulated rainfall to ‘0’ and to set the timestamp
to current date and time.
To change the HI rainfall rate alarm:
1. In the UV / Barometer / Rainfall Area and Rainfall
reading display, press and hold
ALARM
to enter the
Rainfall alarm setting.
2. Rotate the dial left or right to set the desired values.
3. Press
ALARM
to confi rm the settings.
To activate / deactivate the HI rainfall rate alarm:
1. In the UV / Barometer / Rainfall Area and Rainfall
reading display, press
ALARM
repeatedly to select
the desired alarm.
2. Press
MEMORY /
ON/OFF
to activate or
deactivate the alarm.
WEATHER ALARMS
Weather alarms are used to alert you of certain weather
conditions. Once activated, the alarm will go off when a
certain criterion is met.
Alarms can be set for:
• Indoor and outdoor high/low temperatures, dew point
and high/low humidity
• High Heat Index
• High Gust Wind
• Low wind chill
• High UV
• Pressure drop
• High rain rate
See the relevant section for how to set the alarm.
To silence any alarm:
Press any button or rotate the
dial.
CONNECTION TO PC
The weather station is capable of connecting to a PC
computer using the USB connection. The “Virtual
Weather Station” software can read the latest weather
data collected from the base station. Please download
the software from the following website:
http://www2.oregonscientific.com/assets/software/
http://www2.oregonscientific.com/assets/software/
wmr100.exe
For full
details see the “Virtual Weather Station” software
instructions.
WMR100_EN_86L4515-017.indd 11 6/15/06 4:26:29 PM