Oregon Scientific WMR100 - Temperature and Humidity; Temperature and Humidity Trend; Comfort Level

9
EN
ICON DESCRIPTION
Clo
ud
y
Ra
iny
Snowy
TEMPERATURE AND HUMIDITY
The weather station displays indoor and outdoor
readings for:
1. Current, minimum and maximum temperatures and
relative humidity.
2. Comfort level indicator and trend line.
3. Heat index, wind chill and dew point level.
The weather station can connect up to 10 remote
sensors.
NOTE
Channel 1 is dedicated for outdoor temperature
and humidity in the wind sensor.
shows which remote sensor’s data you are viewing.
appears when indoor data is displayed.
The tim
estamp records the date and time when storing
the temperature and humidity readings in memory.
To selec
t the temperature measurement unit:
Press
UNIT
(at the bottom of the base station) to select
°C / °F
.
NOTE
The unit of all temperature related displays will
be changed simultaneously.
To view readings from indoor / outdoor sensors
(1-10) for temperature and humidity:
1. Press
SELECT
to navigate select the Temperature
or Humidity Area.
will show next to the Area.
2. Rotate the dial left or right to select the channel.
To view minimum and maximum temperature or
humidity:
1. In the Temperature or Humidity Area, press
MODE
repeatedly to cycle through the readings for:
• Current Temperature
• Heat Index
• Wind Chill
• Dew Point
• Humidity
2.
Fo
r
e
r er
ach of the above readings, press
MEMORY /
ON/OFF
repeatedly to toggle respectively
between:
• Current / MAX / MIN temperature
• Current / MAX heat index
• Current / MIN wind chill
• Current / MAX / MIN dew point
• Current / MAX / MIN humidity
The timestamp is displayed accordingly in the Clock
Area.
To clear the memories and timestamp for the
temperature, heat index, wind chill, humidity and
dew point readings:
In the Temperature or Humidity Area, press and hold
MEMORY /
In the Temperature or Humidity Area, press and hold
ON/OFF
to clear the readings.
To change the high / low temperature, heat index,
wind chill, humidity and dew point alarms:
1. In the Temperature or Humidity Area, press
ALARM
repeatedly to toggle between high / low
alarms for temperature, heat index, wind chill,
humidity and dew point readings.
2. Press and hold
ALARM
to enter the alarm setting.
3. Rotate the dial left or right to set the desired values.
4. Press
ALARM
to confi rm the setting.
To activate / deactivate the high / low temperature,
heat index, wind chill, humidity and dew point
alarms:
1. In the Temperature or Humidity Area, press
ALARM
repeatedly to select the desired alarm.
2. Press
MEMORY /
ON/OFF
to activate or
deactivate the alarm.
NOTE
The dew point advises at what temperature
condensation will form. The wind chill factor is based on
the combined effects of temperature and wind speed.
TEMPERATURE AND HUMIDITY TREND
The trend lines are shown next to the temperature and
humidity readings. The trend is shown as follows:
TREND ICON DESCRIPTION
Ri
sing
St
e
ady
F
al
ling
COMFORT LEVEL
The Comfort Zone icon indicates how comfortable the
climate is based on current temperature and humidity
measurements:
ICON DESCRIPTION
Co
mfortable
Neut
r
al
Unco
mfortable
WMR100_EN_86L4515-017.indd 9 6/15/06 4:26:22 PM