ORFELD B08 - Operation; Charging

EN
20
• To charge, connect the charging port on the handheld vacuum to the power adapter (17)
integrated in the charging dock (16), then connect the power adapter (17) to a wall outlet. It
takes approx. 4.5 hours to fully charge.
The power adapter (17) is integrated in the charging dock (16). To use the adapter (17)
separately,useascrewdrivertoremovethescrewxingthelid,thenremovetheadapter.
b) Operation
Before vacuuming your delicate rugs or carpet, refer to the rug manufacturer’s
recommended cleaning instructions.
• Press the power button (11) to turn vacuum ON, the vacuum works at MID (2) speed by
default.
• When working, press the speed button (9) to switch between ECO (1), MID (2) and BOOST (3)
modes.
• When working in any mode, press the power button (11) to turn vacuum OFF.
Speed indicator
Speed button
Power button