Orgapack OR-T 400 - User Manual

Need help?

Do you have a question about the Orgapack OR-T 400 and is the answer not in the manual?

Summary

SHORT INSTRUCTIONS

Battery Charging and Insertion

Steps for charging and inserting the tool's battery pack.

Device Operation Overview

Operating Panel

Tension and Welding Settings

Information on adjusting strap tension and welding parameters.

SAFETY INSTRUCTIONS

General Safety Precautions

Essential safety rules for operating the strapping tool.

Intended Use and Misuse

Defines the correct applications and prohibits incorrect usage of the tool.

OPERATING INSTRUCTIONS

Charging the Battery

Step-by-step guide for charging the tool's battery.

Operating the Tool

Instructions on how to perform the strapping process.

Checking the Seal

Checking Battery Charge

Setting Mode of Operation

Setting Strap Tension

Guide to adjusting the strap tension force for optimal results.

Setting Soft Tension

Setting Welding Time

Adjusting the duration of the welding cycle for proper bond strength.

Setting Strap Width

SPECIAL FUNCTIONS

Tool Reset

MAINTENANCE AND REPAIR

Cleaning;Replacing Tension Wheel

Cleaning;Replacing Tooth Plate

Replacing the Knife

TROUBLESHOOTING

Error Codes and Solutions

List of error codes and corresponding troubleshooting actions.

Orgapack OR-T 400 Specifications

General

Sealing Type	Friction weld sealing
Battery Voltage	18 V
Weight (including battery)	3.9 kg
Strap Material	Polyester (PET) and Polypropylene (PP)
Tension Speed	220 mm/s

Related product manuals

Orgapack OR-T 83

12 pages