Oricom Secure 710 - Page 16

14 TrOuBLEShOOTING
AmberpowerLEDashing −Thebatterylevelislow.Returntheparentunittothecharger.
Picture but no sound −Increasethevolumeontheparentunit.
Picture is in black and white −Nightfunctionisactive.Increasethelightlevelinthebaby’sroomifrequired.
Picture on parent unit not displaying
correctly
−Switchoffparentunitthencameraunit.Wait10seconds.Switchonthecamera
unit then parent unit (in that order)
Batterynotcharging −Checkthebatteryisconnectedtothebatteryconnectioninthebattery
compartment.
−Afteraperiodoftime,thebatterymayneedtobereplacedduetoeveryday
usage. Please visit www.oricom.com.au to purchase replacement batteries.
Parent unit beeping Move the parent unit closer to the baby unit until they are within the range.
No picture after 10 seconds VOX function is activated. Turn off VOX if required.
Picture changes every 10 seconds Scan function is on. Turn off the scan function.