Why is my Oricom Baby Monitor battery not charging?
If your Oricom Baby Monitor battery is not charging, check that the battery is properly connected in the battery compartment. After extended use, the battery may need replacement.
Why does my Oricom Baby Monitor say 'Lost Link'?
The 'Lost Link' message on your Oricom Baby Monitor indicates that the parent unit is not receiving a signal from the baby unit. Try moving the parent unit closer to the baby unit. As an alternative, you can reset your monitor: turn off both units, remove the battery from the parent unit, and leave unplugged for one minute. If you have Wi-Fi, stream a video to make it busy. Turn the camera back on and wait 30 seconds. Plug the battery into the parent unit and turn it on. If the display continues to show the 'Lost Link' message, re-register the units, keeping them close together (within 1 meter) and away from other electronic devices.
What to do if my Oricom Secure 720 Baby Monitor has no picture after 10 seconds?
If your Oricom Baby Monitor shows no picture after 10 seconds, the VOX function might be activated. If required, turn off VOX function.
How to fix reception interference on Oricom Baby Monitor?
To improve the reception on your Oricom Baby Monitor, try moving the parent unit closer to the baby unit. You can also try repositioning the baby unit slightly. Check for potential interference from other electronic devices, such as Wi-Fi routers.
Why is my Oricom Baby Monitor beeping?
If your Oricom Baby Monitor's parent unit is beeping, it may be out of range of the baby unit. Try moving the parent unit closer to the baby unit until they are within range.
Why is there a high-pitched noise from my Oricom Secure 720?
A high-pitched noise (feedback) from your Oricom Baby Monitor's parent unit can be resolved by increasing the distance between the parent unit and the baby unit. Alternatively, try reducing the volume on the parent unit.
What to do if Oricom Secure 720 Baby Monitor equipment does not function?
If your Oricom Baby Monitor isn't working, first check that both the parent unit and baby unit are turned on. Ensure the parent unit is charged or placed in the charger, and verify the baby unit is connected to power.
Why is my Oricom Secure 720 Baby Monitor picture in black and white?
If the picture on your Oricom Baby Monitor is in black and white, the night function is likely active. Try increasing the light level in the baby’s room.
What to do if Oricom Secure 720 picture changes every 10 seconds?
If your Oricom Baby Monitor's picture changes every 10 seconds, the scan function is likely turned on. Turn off the scan function.
Why is the amber power LED flashing on my Oricom Baby Monitor?
If the amber power LED on your Oricom Baby Monitor is flashing, the battery level is low. Return the parent unit to the charger.
General| Brand | Oricom |
|---|---|
| Model | Secure 720 |
| Category | Baby Monitor |
| Language | English |
Details hazards and proper disposal methods for batteries. Avoid fire, puncture, and modification.
Instructions on connecting the baby unit to its power source and indicator lights.
Guidance on optimal placement and aiming of the baby unit for best monitoring performance.
Steps for installing the rechargeable battery pack into the parent unit.
Methods for charging the parent unit, both directly and via cradle, with initial charge time.
Information on battery life, charging indicators, and power conservation tips.
Steps to power on and off the parent unit, and notes on feedback prevention.
How to use the talk-back feature to communicate with the baby unit.
Setting high/low temperature warnings and understanding temperature readings.
Adjusting sound detection sensitivity (VOX) for alerts and screen activation.
Procedure for pairing additional baby units (cameras) with the parent unit.
Contact information and steps for seeking assistance with product issues.
Troubleshooting steps for when the baby monitor unit is not working.
Solutions for connection issues and the 'lost link' icon on the display.
To Next Page
