Oricom Secure 720 - Picture but no sound; Picture on parent unit not displaying correctly; Battery not charging; No picture after 10 seconds

13
Picture but no sound −Increasethevolumeontheparentunit.
Picture is in black and white −Nightfunctionisactive.Increasethelightlevelinthebaby’sroomifrequired.
Picture on parent unit not displaying
correctly
−Switchoffparentunitthencameraunit.Wait10seconds.Switchonthecamera
unit then parent unit (in that order)
Batterynotcharging −Checkthebatteryisconnectedtothebatteryconnectioninthebattery
compartment.
−Afteraperiodoftime,thebatterymayneedtobereplacedduetoeveryday
usage. Please visit www.oricom.com.au to purchase replacement batteries.
Parent unit beeping Move the parent unit closer to the baby unit until they are within range.
No picture after 10 seconds VOX function is activated. Turn off VOX if required.
Picture changes every 10 seconds Scan function is on. Turn off the scan function.
TrOuBLEShOOTING