Oriental motor BLE2D120-A User Manual

HP-5104
Brushless Motors
BLE2
Series
Operating Manual
(Basic Function)
(Excluding drivers for electromagnetic brake motor)
Thank you for purchasing an Oriental Motor product.
This Operating Manual describes product handling procedures and safety precautions.
•
Please read it thoroughly to ensure safe operation.
•
Always keep the manual where it is readily available.
For your use, refer to the USER MANUAL downloaded from Oriental Motor Website for detailed
instructions on how to use the product.

Oriental motor BLE2D120-A Specifications

General

Brand	Oriental motor
Model	BLE2D120-A
Category	Engine
Language	English

Summary

Safety precautions

Operating environment

Warnings about using the product in specific environments like explosive or corrosive areas.

Handling of product (Operations)

Precautions for safe handling, transport, installation, connection, and operation of the product.

Maintenance and inspection

Repair, disassembly and modification

Product handling precautions

Installation safety

Connection safety

Operation safety

Precautions for use

Wirings precautions

Operations precautions

Precautions to be taken during the operation of the product, including brake motor usage.

Installing

Installation location

Installation method

Connecting

Connecting the power supply (CN1)

Instructions for connecting the main power supply to the driver.

Connecting the motor and driver

Guide for connecting the motor to the driver using a connection cable.

Grounding

Procedures for properly grounding the driver and related components for safety.

Connecting the I/O signals (CN5)

How to connect input and output signals to the driver's CN5 connector.

Connecting external analog setting devices

Connecting the USB cable

Connecting the regeneration resistor

Connection diagram

A visual representation of the wiring and connection of components.

I/O signals list

Operating using the operation panel

AC power ON

Operation selection

Rotation direction selection

Start of motor

Instructions on how to start and stop the motor using the RUN and STOP keys.

Changing speed of motor

How to adjust the motor's speed using the setting dial on the operation panel.

Operating using external signals

Operation data

Setting of rotation speed

How to set the motor's rotation speed using the operation panel.

Setting rotation speed with analog device

How to set rotation speed using external potentiometer or DC voltage.

Setting of torque limiting

Setting of acceleration/deceleration time

Operation/stop

How to operate and stop the motor using FWD/REV inputs in 2-wire mode.

Setting of rotation direction

Operation panel

Names and functions of parts

Identifies and explains the components of the driver's operation panel.

How to read the display

Function mode types

Operation transitions

Items that can be monitored

Monitor items

Details on checking rotation speed, load factor, alarms, I/O status, etc.

Setting of operation data

How to set various operation parameters like speed and torque.

Setting of parameters

Procedures for setting various parameters using IDs.

Test mode

How to check I/O signals and electromagnetic brake function.

Edit lock function

Parameter list

Maintenance and inspection

Inspection

Troubleshooting

Alarm

Alarm reset

Procedures for resetting generated alarms, including input and panel methods.

Alarm history

Alarm lists

Lists of alarms, their causes, and remedial actions.

Specifications

Specifications

Pin assignment